User`s manual

•
ELba PC file share Setup
Label Value Explanation
Hostname: MyComputer The computer name defined in the
Network Identification tab in the
Local Area Connection properties
Share MyShare Share Name – typically corresponds
to the drive or directory name you
want to share (see Sharing
preparation above)
Login --- Can be left out (otherwise: user
name)
Password --- Can be left out (otherwise: user
password)
OS Windows 2000 / XP MUST be that!
PPPoS --- Only used for serial connection
Device --- Only used for serial connection
Speed --- Only used for serial connection
local IP --- Can be left out (is checked
automatically)
remote IP 2.168.55.14 19 IP address of computer
Mountpoint flash/elba/netmount /mnt/ Must not be changed!
Syncpoint MyELba Name you can assign freely.
• You now can exi ettings and save them
f sharing
6. From the ELba Control Panel, select "t" for T en "c" for Communication and "p" for
Con C. e is no confirmation mes
Go to the File Manager. Within the user dire a new one called "netmount".
Netm corresponds to the shared PC MyShare).
Furthermore, you find the syncpoint, a direc ", both in the ELba user
dire d in th yShare direc r the other
MyELba directory and then call s/Commun ith PC, you
will find the same files on both the ELba and th
t the s
.
. BRAILLEX ELba and the computer are ready
ools, th
or file
nect ELba-P Ther sage.
ctory, you find
ount directory (in our example, it is
tory called "MyELba
ctory an e computer's M
Tool
tory. If you copy any file into one o
ications/ "s" for Synchronize data w
e PC syncpoints.
138