Operator's Manual

OM-E 2072-09689-00
4-9
To start ALE programming:
1. Press MENU to display the Menu screen.
MENU
FREQCHAN ALE
BIT
2. Press MORE to scroll to the second Menu screen.
MENU
PROGLOCK PSW
DIM
3. Press PROG.
PROG
ALERAD
4. Press ALE to enter the ALE Programming menu.
5. Press MORE as required to access additional ALE programming
parameters.
ALE
PROGRAMMING
DIRNET
OPT
AMD
In the ALE Programming mode, you can program the following features:
Option Description See Page …
NET
Net parameters: station names, options, members and scanned
channels.
4-10
REC
Edit the list of stations not appearing in the directory from which calls
have been received. This item is displayed only after such calls have
been received, and therefore will not appear when the Micom-Z is just
turned on.
4-12
DIR
Directory: configuration of the ALE address list. 4-12
AMD
Messages: preparation of AMD messages ready to be sent with ALE
calls.
NOTE
During ALE operation, you can also edit, or prepare, a
message, on-line, using the PAGE EDIT option.
4-12
OPT
Options: configuration of the various ALE options, such as PTT
timeout, external alarm, and so on.
4-13
AUTO
Autodial parameters: shortcuts for ALE calls to frequently called
stations.
4-14
STOR
Store the changes made in the ALE programming session. 4-15
The following sections explain the programming of these features.