Operator's Manual

OM-E 2072-09689-00

2-5

2-3.1.3 Icons

Micom-Z displays icons in two areas: to the right of the channel number, and in the area just above the

options display bar (at the left-hand side).

Icon Description

LSB mode

USB mode

Squelch enabled

ClearCom function enabled

Notch filter enabled

Indicates that a special-purpose filter (any filter except the 2.7 kHz filter) is in use

Clarifier enabled

ALE or CCIR stack stores messages

AGC mode set to OFF or FAST

Monitoring enabled

2-3.1.4 Message Attached Alert

When a message is attached to the received call (an option available for

ALE calls even if you are using the Channel mode, and for the CCIR

mode), an exclamation sign ! appears to the left of the originating station

name.

You can view the message contents after you accept the call.

FROM

!1002

2-3.2 Using the Keypad

Each key is imprinted with a numeral and several letters.

These characters are accessed in clockwise order, as follows:

• A single key press enters the numeral or symbol

• Two consecutive key presses enter the first letter

• Three consecutive key presses enter the second letter

• Four consecutive key presses enter the third letter

• Five consecutive key presses enter the fourth letter

• To enter a blank space, press

twice.

ALM

GPS

Esc