Operator's Manual

OM-E 2072-09689-00
2-16
2-6.3 Choosing a Different Channel
To choose a channel:
1. Press MENU to display the menu screen, and press CHAN.
MENU
FREQCHAN
CCIR
BIT
The last used channel number is displayed, blinking.
CH 1
F 2,000.00
BAND SQ
DSP
NOTE
To access the priority channel, press ESC momentarily.
The priority channel is available in the Scan mode, that is,
when ALE and CCIR are disabled, provided it has been
preprogrammed by the MRC.
2. Select a channel by pressing the UP/DOWN keys until you reach
the required channel,
CH 12
BAND SQ
DSP
or
Type the desired number in the keypad.
Example: To choose channel 12:
1
*
A
B
C
2
J
K
L
5
T
U
V
8
N
O
M
6
W
X
Y
Z
9
D
E
F
3
0
#
MENU
G
H
I
4
Esc
P
ALM
GPS
P
Q
S
7
R
Type 12
The channel number blinks, indicating that the selection has not yet
been confirmed.
3. When the desired channel is displayed, press ENTER to confirm
your choice.
CH 12
F 15,000.00
BAND
SQ
DSP
NOTE
If you enter a channel that is not yet programmed, a NOT PROG
message appears. To program a new channel, refer to Chapter 4, or
use the MRC software.