User's Manual

ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915
- Page 15 -
ENGLISH
5.2 FUNCTIONAL TESTING OF TRANSMITTING UNIT
Follow the diagram below (starting from the top left corner) to solve or identify the problem.
DID CHECK
LIGHT TURN ON?
YES
RECHARGE BATTERY.
(see Paragraph 5.4)
NO
HAS CHECK LIGHT
BEEN BLINKING ALL
THE TIME?
YES
NO
DOES CHECK
LIGHT STAY ON
STEADY ALL THE
TIME?
YES
NO
CHECK RECEIVER
OPERATION
(see Paragraph 5.3)
IS ACCESS TO
PROGRAMMING
MODE POSSIBLE?
(see Paragraph 3.1)
YES
NO
CHANGE FREQUENCY
RANGE
(see Paragraph 3.2)
CONTACT SERVICE.
IS RADIO REMOTE
CONTROL WORKING
NOW?
YES
NO
CHECK COMPLETED.
DID CHECK
LIGHT TURN ON?
NO
YES
HOLD START
COMMAND FOR AT
LEAST 6-7 SECONDS.
CONTACT SERVICE.
DID CHECK LIGHT
BLINK ONLY ONCE
WHEN CHANNELS
WERE ACTIVATED?
YES
NO
CHECK RECEIVER
OPERATION
(see Paragraph 5.3)
UNLOCK PIN CODE.
(see Paragraph 3.4)
DOES CHECK LIGHT
STAY ON STEADY
WITH START
ACTIVE?
YES
NO
CONTACT SERVICE.
DOES CHECK LIGHT
BLINK AND THEN
GO OUT WHEN
STOP COMMAND IS
GIVEN?
YES
NO
STABLE COMMAND
ENTERED UPON START.
IS RADIO REMOTE
CONTROL WORKING
NOW?
YES
NO
DOES CHECK GO
OUT WHEN START
IS RELEASED?
NO
YES
