Cut Sheet

ELD4RT1227
ELD4RT1240
PROJECT INFORMATION:
DIMENSIONS
PRODUCT SPECIFICATIONS
CATALOG NUMBER
Features: Quick terminal connector. Advanced heat
sink design for best heat dissipation to maintain
maximum LED module life. Suitable for use in fixtures
installed in insulated ceilings. Limited 5 year warranty.
UL Listed.
Meets restricted air flow requirement (per ASTM
E-283). CA Title 24 compliant. Meets ENERGY STAR
requirements.
The ELD4RT insert is a 2-wire connector unit for
installation into cans with a mating 2 wire connector only.
To use the ELD4RT insert in an incandescent
can with medium base socket, the “PSA30 adaptor”
(medium socket to 2-wire connector) is included.
Example
: ELD4RT1227
Project Name:
4" LED Insert Kit
Fixture Type:
Date:
Lamp: CREE COB chip, CRI 90
50,000 hours life expectancy
Driver: 120V AC, high quality driver, dimmable
ELD4RT1227 = 2700°K, 12.9W LED, 850 lm
ELD4RT1240 = 4000°K, 12.9W LED, 900 lm
Note: Trim is not included. Can is not included.
TRIMS
4” Reflector Trim
EL4330W EL4330B
EL4330BZ EL4330C
EL4330CP
O.D.: 5”
4” Baffle T
rim
EL4331W EL4331B
EL4331BZ EL4331N
EL4331CP
O.D.: 5”
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2014 All Rights Reserved. Rev. April 2014. ELCO Lighting reserves the right to make specification and design changes without notice.
ELCO
LIGHTING
ELCO Lighting©
ELCO Lighting©
Project Name:
PROJECT INFORMATION:
DIMENSIONS
PRODUCT SPECIFICATIONS
CATALOG NUMBER
Fixture Type:
Date:
ELCO Lighting©
ELCO Lighting©
ELD4RT1227
ELD4RT1230
ELD4RT1240
4” LED Insert Kit
• Suitable for use in fixtures installed in insulated
ceilings
Suitable for installation in tall and shallow cans•
Suitable for installation into a 4” recessed•
fixtures with 2-wire connector.
Suitable for installation into a 4” recessed•
fixtures with medium base socket, using PSA30
adaptor (included)
Housing meets restricted air flow requirement•
(per ASTM E-283).
Meets ENERGY STAR requirements.•
• Complete assembly to consist of
HOUSING/INSERT/TRIM
Lamp: LED array chip CRI 90
ELD4RT1227: 12W 2700°K, 800 lm, beam angle 90°
ELD4RT1230: 12W 3000°K, 850 lm, beam angle 90°
°K, 900 lm, beam angle 90°ELD4RT1240: 12W 4000
LED Driver: 120V AC dimmable
Life-span: 50,000 hours
Warranty: 5 years limited
Housings: EL490ICA
EL490RICA
Inserts: ELD4RT1227
ELD4RT1230
ELD4RT1240
4 1/2"
5"
ELCO
LIGHTING
Trims: EL4330B
EL4330BZ
EL4330C
EL4330CP
EL4330W
EL4331B
EL4331BZ
EL4331C
EL4331CP
EL4331W
EL4351B
EL4351BZ
EL4351C
EL4351CP
EL4351W
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2016 All Rights Reserved. Rev. Feb. 2016. ELCO Lighting reserves the right to make specification and design changes without notice.