Specifications Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 26 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 26 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
4" Housing with Plaster
Frame for Remote
Transformer for MR16 Bi-Pin
Features
4" housing with Plaster Frame and MR16 Socket.
For use with remote transformer.
Lamp: 50W MAX 12V MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Can be used with most 4" Low Voltage trims (not
included).
Specifications
Wattage 35W
Voltage 120V
Lamp Type GU5.3 BiPin
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Single wall new construction.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars
can easilty be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four
3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housings with the joists.
Electrical:
Input Voltage: 120V AC.
Output Voltage: 12V AC.
Thermally protected against improper lamping.
Trims: Compatible with ELCO 4" MR16 trims.
Lamp: Designed for use with GU5.3 MR16 LED lamps.
Listings: UL Listed for Damp Location. UL Listed for Feed Through.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Dimensions
Product Numbers
Item Description Lamp type Watts Voltage
E450
4" Low Voltage Housing for
Remote Transformer
GU5.3 BiPin 35W 120V