Operation Manual

Menu: Time programs
Menu: Holiday
For the heating circuits and for DHW
heating, a number of switching
programs are available. They are
activated in Automatic operation and
control the change of the temperature
levels (and the associated setpoints) via
the selected switching times.
Entering the switching times
The switching times can be set in a
combined way, that is, either jointly for
several days or in the form of se¬parate
times for individual days. When
preselecting groups of days like for
instance Mo...Fr and Sa...Su that use
the same switching times, the setting of
switching programs is simplified.
Switching points
Line no.
Operating line
Factory setting
HC1
HC2
3/HC3
4/DHW
500
520
540
560
Preselection Mo – Su
Mo – Fr
Sa – Su
Mo – Su
Mo - Su
501
521
541
561
1. phase on
6 : 00
502
522
542
562
1. phase off
22 : 00
503
523
543
563
2. phase on
- - : - -
504
524
544
564
2. phase off
- - : - -
505
525
545
565
3. phase on
- - : - -
506
526
546
566
3. phase off
- - : - -
Standard program
All time programs can be reset to
their default setting. Each time
program hat its own operating line
to make this reset.
Line no.
Operating line
Factory setting
HC1
HC2
3/HC3
4/DHW
516
536
556
576
Default values
No
Note: In that case, individual setting will be lost!
Line no.
Operating line
Factory setting
HC1
HC2
642
652
Start
- - : - -
643
653
End
- - : - -
648
658
Operating level
Frost protection
Reduced
Frost protection
The holiday program can only be used in automatic mode.
Holiday
The holiday program allows switching
the operating level of the HCs
according to date. On the last day
heating is still deactivated. On the
following day heating to comfort
setpoint will commence according to
the time program.
21
Line no.
Operating line
515, 535,555,575
Copy to day
Copy to day
If, in the days selection, only one day
of the week is selected, its time periods
can be copied to other days of the
week.