User manual

EPIR2 User Manual v.1.4

5. Left-click on the Remove button to remove the wireless device.

6. Watch the progress bar indication.

7. After the successful wireless device removal process, the stripe above the wireless device icon

will turn red.

ATTENTION: In order to correctly remove the wireless device from the system, the user must

remove the device using SMS text message or ELDES Conguration Tool software and restore the

parameters of the wireless device to default afterwards. If only one of these actions is carried out,

the wireless device and the system will attempt to exchange data to keep the wireless connection

alive. This leads to fast battery power drain on the battery-powered wireless device.

2.3. EKB3W wireless keypad overview

ATTENTION: The EKB3W commands provided in this user manual are intended for basic

conguration and control of the EPIR2 system. For complete conguration and control using

EKB3W, please refer to the latest version of EPIR2 Conguration Manual located at www.

eldes.lt/en/download

EKB3W is a wireless LED keypad intended for using with EPIR2 alarm system.

LED Functionality

ARMED Alarm system is armed /

Conguration mode

1 2 3

4 5 6

ARMED

READY

SYSTEM BYPS

A B

8 9

0 #

STAY

BYPS

INST

CODE

READY System is prepared for

arming

SYSTEM System fault / valid com-

mand is being entered

BYPS Zone bypass mode

1-12 Steady ON - violated

zone / ashing - violated

tamper