User manual

34
34 EN
EPIR2 User Manual v.1.4
Main Settings
Function Command Value Range / Comment Example
Add or change
a single user
phone number
XXXX_NRn:
[phone]
or XXXX_NRn:
004417001111111
or XXXX_
NRn:017001111111
NRn = [NR1... NR10]
The EPIR2 alarm system
allows you to enter up to ten
dierent mobile numbers to
gain access to and control
the system. User 1 number
is mandatory - all the others
can be skipped.
All numbers must be entered
in one of the following
formats:
• International (with
plus) – The phone
numbers starting with
plus and an interna-
tional country code in
the following format:
+[international code]
[area code] [local num-
ber], example for UK:
[phone].
• International (with
00) – The phone num-
bers starting with 00 and
an international country
code in the following
format: 00[international
code][area code][local
number], example for
UK: 004417091111111.
• Local – The phone num-
bers starting with an
area code in the follow-
ing format: [area code]
[local number], example
for UK: 017091111111.
1111_
NR1:[phone]
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an
SMS/text message, replace the underscore symbol with a single space.