Service manual

— Page 58 —
© January 2013 Aqua-Hot
®
600-D01 Series Hydronic Heating System Service Manual - Rev. A
SECTION 8: DETACHING AND REATTACHING THE DIESEL BURNER
1. Locate the Diesel-Burner’s Controller and disconnect both plugs.
Step 4: Disconnect the Diesel Burner from the Aqua-Hot
Step 3: Disconnect the Diesel Burner’s Controller
Figure 34
Figure 35
1. The Diesel-Burner is secured to the Aqua-Hot with two Eye Bolt Nuts that can be
loosened, and swung out of the way by using a 10mm socket wrench with a 10 inch
long extension.
Eye Bolt
Eye Bolt