Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 103 12/24/2010
<stat>,<fo>,<ct>[,<pid>,[<mn>],[<da>],[<toda>],<length><CR><LF><
cdata>]
for CBM storage:
+CMGR: <stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
2) If PDU mode (+CMGF=0) and Command successful:
+CMGR: <stat>,[<alpha>],<length><CR><LF><pdu>
OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<alpha> string type (string should be included in quotation marks)
alphanumeric representation of <da> or <oa> corresponding
to the entry found in MT phonebook; implementation of this
feature is manufacturer specific
<da> GSM 03.40 TP-Destination-Address Address-Value field in
string format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character set (specified by +CSCS in TS 07.07);
type of address given by <toda>
<data> In the case of SMS: GSM 03.40 TP-User-Data in text mode
responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used and
<fo> indicates that GSM 03.40
TPUser-Data-Header-Indication is not set:
- if TE character set other than "HEX" (refer Command Select
TE Character Set +CSCS in TS 07.07):ME/TA
converts GSM alphabet into current TE character set
according to rules of Annex A
- if TE character set is "HEX": ME/TA converts each 7-bit
character of GSM alphabet into two IRA character
long hexadecimal number (e.g. character P (GSM 23)
is presented as 17 (IRA 49 and 55))
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is
used, or <fo> indicates that GSM 03.40
TP-User-Data-Header-Indication is set: ME/TA
converts each 8-bit octet into two IRA character long
hexadecimal number (e.g. octet with integer value 42
is presented to TE as two characters 2A (IRA 50 and
65)) In the case of CBS: GSM 03.41 CBM Content of
Message in text mode responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used: