Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 114 12/24/2010
4.2.13 AT+CSCB Select Cell Broadcast SMS Messages
AT+CSCB Select Cell Broadcast SMS Messages
Response
+CSCB: (list of supported <mode>s)
OK
Test Command
AT+CSCB=?
Parameter
See Write Command
Response
+CSCB: <mode>,<mids>,<dcss>
OK
Read Command
AT+CSCB?
Parameters
See Write Command
Response
TA selects which types of CBMs are to be received by the ME.
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+CSCB=
<mode>[,mids>[,
<dcss>]]
Parameters
<mode> 0 message types specified in <mids> and <dcss> are
accepted
1 message types specified in <mids> and <dcss> are not
accepted.
<mids> string type (string should be included in quotation marks); all
different possible combinations of CBM message identifiers
(refer <mid>) (default is empty string); e.g. "0,1,5,320,922".
Total 15 different <mids> values can be supported. <mids>
values cannot be written consecutively, such as "100-200"
<dcss> string type(string should be included in quotation marks); all
different possible combinations of CBM data coding schemes
(refer <dcs>) (default is empty string); e.g. "0,5". Total 5
different <dcss> values can be supported. <dcss> values
cannot be written consecutively, such as "0-5"
Reference
GSM 07.05
Note
z AT+CSCB=0 will reset <mids> and <dcss> and select no <mids> and
no <dcss>.
z AT+CSCB=1 means all <dcss> are accepted but this command has no
effect on the list of the <mids> accepted. "0-255" means all <dcss> are