Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 186 12/24/2010
ial number>,
<user name>,
<password>,
<rate>)]
<mode> a numeric parameter which indicates the wireless connection
mode
0 set CSD as wireless connection mode
1 set GPRS as wireless connection mode
GPRS parameters:
<apn> a string parameter(string should be included in quotation
marks) which indicates the access point name
<user name> a string parameter(string should be included in quotation
marks) which indicates the user name
<password> a string parameter(string should be included in quotation
marks) which indicates the password CSD parameters:
<dial number> a string parameter(string should be included in quotation
marks) which indicates the CSD dial numbers
<user name> a string parameter(string should be included in quotation
marks) which indicates the CSD user name
<password> a string parameter(string should be included in quotation
marks) which indicates the CSD password
<rate> a numeric parameter which indicates the CSD connection
rate
0 2400
1 4800
2 9600
3 14400
Reference Note
8.2.20 AT+CIPSRIP Show Remote IP Address and Port When Received Data
AT+CIPSRIP Show Remote IP Address and Port When Received Data
Response
+CIPSRIP: (list of supported <mode>s)
OK
Test Command
AT+CIPSRIP=?
Parameter
See Write Command
Response
+CIPSRIP: <mode>
OK
Read Command
AT+CIPSRIP?
Parameter