Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 188 12/24/2010
1<interval<=180(s)
<timer>
1<timer<=10
Reference Note
If "+PDP: DEACT" urc is reported because of module not attaching to gprs
for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.
8.2.22 AT+CIPMODE Select TCPIP Application Mode
AT+CIPMODE Select TCPIP Application Mode
Response
+CIPMODE: (0-NORMAL MODE,1-TRANSPARENT MODE)
OK
Test Command
AT+CIPMODE=
?
Parameter
See Write Command
Response
+CIPMODE: <mode>
OK
Read Command
AT+CIPMODE?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CIPMODE=
<mode>
Parameter
<mode> 0 normal mode
1 transparent mode
Reference Note
8.2.23AT+CIPCCFG Configure Transparent Transfer Mode
AT+CIPCCFG Configure Transparent Transfer Mode
Response
+CIPCCFG: (NmRetry:3-8),(WaitTm:2-10),(SendSz:1-1460),(esc:0,1)
OK
Test Command
AT+CIPCCFG=
?
Parameters