Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 192 12/24/2010
8.2.27 AT+CIPQRCLOSE Quick Remote Close
AT+CIPQRCLOSE Quick Remote Close
Response
+CIPQRCLOSE: (list of supported <mode>s)
OK
Test Command
AT+CIPQRCLO
SE=?
Parameter
See Write Command
Response
+CIPQRCLOSE: <mode>
OK
Read Command
AT+CIPQRCLO
SE?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CIPQRCLO
SE=<mode>
Parameter
<mode> 0 module returns FIN frame after module received FIN
frame from remote side
1 module returns RST frame after module received FIN
frame from remote side
Reference Note
z If RST frame instead of FIN frame is responded to remote side,
disconnection process will speed up.
z To enable this function, parameter <mode> must be set to 1 before
connection.
8.2.28 AT+CIPSCONT Save TCPIP Application Context
AT+CIPSCONT Save TCPIP Application Context
Read Command
AT+CIPSCONT
?
Response
TA returns TCPIP Application Context, which consists of the following
AT Command parameters.
+CIPSCONT:<mode0>
+CIPCSGP:<mode>
Gprs Config APN:<apn>
Gprs Config UserId:<user name>