Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 193 12/24/2010
Gprs Config Password:<password>
+CLPORT:<port>
+CIPHEAD:<mode>
+CIPSHOWTP:<mode>
+CIPSRIP:<mode>
+CIPATS:<mode>,<time>
+CIPSPRT:<send prompt>
+CIPQSEND:<n>
+CIPMODE:<mode>
+CIPCCFG:<NmRetry>,<WaitTm>,<SendSz>,<esc>
+CIPMUX:<n>
+CIPDPDP:<mode>, <interval>, <timer>
+CIPRXGET:<mode>
+CIPQRCLOSE:<mode>
+CIPUDPMODE:<mode>
OK
Parameters
<mode0> 0 saved, the value from NVRAM
1 unsaved, the value from RAM
For other parameters, see the related command.
Execution
Command
AT+CIPSCONT
Response
Module saves current TCPIP Application Contexts to NVRAM. When
system is rebooted, the parameters will be loaded automatically.
OK
Reference Note