Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 60 12/24/2010
3.2.17 AT+CLCK Facility Lock
AT+CLCK Facility Lock
Response
+CLCK: (list of supported <fac>s)
OK
Test Command
AT+CLCK=?
Parameter
See Write Command
Response
This Command is used to lock, unlock or interrogate a ME or a network
facility <fac>. Password is normally needed to do such actions. When
querying the status of a network service (<mode>=2) the response line for
‘not active’ case (<status>=0) should be returned only if service is not
active for any <class>.
If <mode>≠2 and Command is successful
OK
If <mode>=2 and Command is successful
+CLCK: <status>[,<class1>[<CR><LF>+CLCK:
<status>,<class2>[…]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CLCK=
<fac>,<mode>
[,<passwd>
[,<class>]]
Parameters
<fac>
"AO" BAOC (Barr All Outgoing Calls)
"OI" BOIC (Barr Outgoing International Calls)
"OX" BOIC-exHC (Barr Outgoing International Calls
except to Home Country)
"AI" BAIC (Barr All Incoming Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
"AB" All Barring services
"AG" All out oing barring services
"AC" All in Coming barring services
"FD" SIM card or active application in the UICC (GSM or
USIM) fixed dialling memory feature (if PIN2
authentication has not been done during the current
session, PIN2 is required as <passwd>)
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks
password in MT power-up and when this lock
command issued) Correspond to PIN1 code.