Specifications

SIM900 AT Command Manual

SIM900_AT Command Manual_V1.03 62 12/24/2010

If error is related to ME functionality:

+CME ERROR: <err>

Parameters

<n> 0

Disable +CLIP notification.

1 Enable +CLIP notification.

<m> 0 CLIP not provisioned

1 CLIP provisioned

2 unknown

(e.g. no network, etc.)

Unsolicited Result Code

When the presentation of the CLI at the TE is enabled (and calling

subscri

er allows), an unsolicited result code is returned after every RING

(or +CRING: <type>) at a mobile terminating call.

+CLIP: <number>,<type> [,<subaddr>,<satype>,<alphaId>,<CLI

validity>]

Parameters

<number> String type (string should be included in quotation marks)

phone number of calling address in format specified by

<type>

<type> Type of address octet in integer format;

129 Unknown type(IDSN format number)

161 National number type(IDSN format)

145 International number type(ISDN format )

177 Network specific number(ISDN format)

<subaddr> string type (

subaddress of format specified by <satype>)

<satype> Integer type(type of subaddress)

<alphaId> string type (string should be included in quotation marks)

alphanumeric representation of <number> corresponding

to the entry found in phone book

<CLI validity> 0 CLI valid

1 CLI has been withheld by the originator

2 CLI is not available due to interworking problems

or limitations of originating network

Reference Note

3.2.19 AT+CLIR Calling Line Identification Restriction

AT+CLIR Calling Line Identification Restriction

Test Command

AT+CLIR=?

Response

+CLIR: (list of supported <n>s)