User's Manual

3.2 Installation schematic diagram(B)
A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit
kit can fit the luminaire.
B: crew clockwise the E26 adaptor into the lamp holder. Tighten.
C:For the recessed can without ear, unscrew the V-clips holder and remove them. Install the friction clips onto the housing.
Choose the screws holes (5in or 6in location) according to the size of the recessed can, then fix the V clips holder to the
corresponding screw holes. Refer to the image on the left for 5in recessed can, image on the right for the 6in can.