Installation Guide
Completing Installation
• Download and install the Elecbrakes App on your smart
phone from the App Store or Google Play.
• Connect the trailer to the vehicle and attach the electrical
connections.
• Turn the vehicles lights on to power up the Elecbrakes
unit.
• Launch the App, the App will establish a connection with
the Elecbrakes unit.
• To complete the installation, the Elecbrakes unit needs to
learn the installation angle, to do so take the trailer for a
drive on a straight road, apply vehicle brakes moderately
for approx. 4-5 sec, conrm installation angle is set by
checking “Settings > Device > Angle” for a value between
0 and 360 degrees.
Note: Brake Response will begin once calibration has been complete.
Page 6