Data Sheet

BLE-HC Module
Pruduct data sheet Technical suppor: [e-mail]
7
11. Get/set transmit mode󳋡
Because of cc2540 has 2 port(usb port, uart port), so you need select a port for data transmit,
this transmit mode is valid only connected, otherwise data is from usb port to uart port.
COMMAND
RESPONSE
PARAMETER
AT+TRANSMODE
+TRANSMODE=<n>
1.USB<->Central <=> App;
USB<->Peripheral <=> App
2.USB<->Central <=> App;
UART<->Peripheral <=> App
3.UART<->Central <=> App;
USB<->Peripheral <=> App
4.UART<->Central <=> App;
UART<->Peripheral <=> App
Example:
1.󳋡 Command: AT+TRANSMODE
Response: +TRANSMODE=1.USB<->Central <=> App;USB<->Peripheral <=> App
2.󳋡 Command: AT+TRANSMODE 1
Response: +TRANSMODE=1.USB<->Central <=> App;USB<->Peripheral <=> App, OK.
3.󳋡 Command: AT+TRANSMODE ?
Response: AT+TRANSMODE Get transmitMode num. 󳋡
AT+TRANSMODE ? Get Usage.󳋡
AT+TRANSMODE <n> Set device transmitMode.
1.USB<->Central <=> App; USB<->Peripheral <=> App
2.USB<->Central <=> App; UART<->Peripheral <=> App
3.UART<->Central <=> App; USB<->Peripheral <=> App
4.UART<->Central <=> App; UART<->Peripheral <=> App