User Manual

ManualsBrandsELECFreaks ManualsArduino KitsArduino Starter Kit (Absolute Beginner)

ArduinoStarterKit(AbsoluteBeginner)
FromWiki
Contents
1Introduction
2GettingStartedwithArduino
2.1Part1.ArduinoStartblink
2.2Part2.ButtoncontrolLED
2.3Part3.Vibrationsensorcontrolpassivebuzzer
2.4Part4.PIRsensorcontrolmotorfan
2.5Part5.LDRsensorcontrolmotorfan
2.6Part6.Soilmoisturesensorcontrolrelay
2.7Part7.Encodersensorcontrolservo
2.8Part8.DisplayTemperatureandHumidity
2.9Part9.DisplayNumberOfIRremote
3Download
4Howtobuy
5Licensing
6ExternalLinks
Introduction
TheArduinoStarterKitprovidedbyElecFreaksisagreatmaterialtogetusersintolearningstepbystep
conveniently.Forthiskit,thereisnoneedforsoldering,plugthenuse,theconstructionoftheworking
circuitcanbedonewithinoneminute.Ithas9coursesintotal,contentincludesLED,infraredsensor,
servo,andIRremotecontrol.
ThekitusestheFreaduinoUNO,whichistheimprovedversionoftheofficialUNOand100%
compatiblewithArduino.Itprovideseasytousebricksensorinterface,3.3vor5vIOswitch,power
supplywithDCDCcircuitwhichsupportMAX2Aetc.
GettingStartedwithArduino
DownloadIDEfrom:ArduinoDownload(http://www.arduino.cc/en/Main/Software)
DownloadCodeandLibraries:ArduinoStarterKitDemoCode(http://elecfreaks.com/estore/download/starterkit/starterkit.zip)

Summary of content (8 pages)

PAGE 1
Arduino Starter Kit(Absolute Beginner) From Wiki Contents 1 Introduction 2 Getting Started with Arduino 2.1 Part1. Arduino Start blink 2.2 Part2. Button control LED 2.3 Part3. Vibration sensor control passive buzzer 2.4 Part4. PIR sensor control motor fan 2.5 Part5. LDR sensor control motor fan 2.6 Part6. Soil moisture sensor control relay 2.7 Part7. Encoder sensor control servo 2.8 Part8. Display Temperature and Humidity 2.9 Part9.
PAGE 2
Part1. Arduino Start blink /* PART1 ARDUINO START Blink Turns on LED for one second, then off for one second, repeatedly. Get the code from: Arduino IDE‐>File‐>Example‐>Basics‐>Blink Pin 13 has an LED connected on most Arduino boards. */ int led = 13; // the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output.
PAGE 3
Press the button, led ON, press again led OFF */ int led = 5; // The D5 pin,driving LED int button = A0; // The A0,read the button,Here used a analog pin as digital pin. void setup() { pinMode(led, OUTPUT); // initialize the LED pin as an output. pinMode(button, INPUT_PULLUP);// initialize the BUTTON pin as an input.
PAGE 4
Part4. PIR sensor control motor fan /* PART4 PIR Sensor CONTROL Motor fan If someone passing from the front, the fan will turn */ int pir = A0; // The A0 pin,read PIR int motor = 6; // The 6 pin,driving the motor void setup() { pinMode(pir,INPUT);// initialize the PIR pin as an input. pinMode(motor,OUTPUT);// initialize the motor pin as an output.
PAGE 5
int photodiode= A0; int motor = 6; // The A0 pin,read Photodiode // The 6 pin,driving the motor void setup() { pinMode(photodiode,INPUT);// initialize the photodiode pin as an input. pinMode(motor,OUTPUT); // initialize the motor pin as an output. } void loop() { int speed=analogRead(photodiode)/2;//because the read max value is 512 analogWrite(motor,speed);//According to the intensity of light motor speed control } Part6.
PAGE 6
Part7. Encoder sensor control servo /* PART7 Encode Sensor CONTROL Servos Turn the rotary encoder control servos */ #include int encodeB= A0; // The A0 pin,read encodeB int servos = 6; // The 6 pin,driving the servos Servo servo; //Get a servo controller int angle=90; //set the servo angle void setup() { pinMode(encodeB,INPUT);// initialize the encodeB pin as an input. servo.
PAGE 7
#define CLK 4//pins definitions clk for TM1637 #define DIO 5//pins definitions dio for TM1637 TM1637 tm1637(CLK,DIO);//get Segment display controler DHT11 dht11(A0);//DHT11 A0 void setup(){ tm1637.init(); tm1637.set(BRIGHT_TYPICAL);} void loop(){ dht11.start(); tm1637.display(3,12);//Temperature Unit tm1637.display(2,(dht11.DHT11data)[2]%10); tm1637.display(1,(dht11.DHT11data)[2]%100/10); delay(1000); tm1637.clearDisplay(); tm1637.display(3,(dht11.DHT11data)[0]%10); // humidity tm1637.display(2,(dht11.
PAGE 8