Data Sheet

ITG-3200 Product Specification
Document Number: PS-ITG-3200A-00-01.4
Revision: 1.4
Release Date: 03/30/2010
4 of 39
1 Document Information
1.1 Revision History
Revision
Date
Revision
Description
10/23/09
1.0
Initial Release
10/28/09
1.1
Edits for readability
02/12/2010
1.2
Changed full-scale range and sensitivity scale factor (Sections 2, 3.1, 5.3, and 8.3)
Changed sensitivity scale factor variation over temperature (Section 3.1)
Changed total RMS noise spec (Section 3.1)
Added range for temperature sensor (Section 3.1)
Updated VDD Power-Supply Ramp Rate specification (Sections 3.2 and 4.4)
Added VLOGIC Voltage Range condition (Section 3.2)
Added VLOGIC Reference Voltage Ramp Rate specification (Sections 3.2 and 4.4)
Updated Start-Up Time for Register Read/Write specification (Section 3.2)
Updated Input logic levels for AD0 and CLKIN (Section 3.2)
Updated Level I
OL
specifications for the I
2
C interface (Section 3.3)
Updated Frequency Variation Over Temperature specification for internal clock source
(Section 3.4)
Updated VLOGIC conditions for I
2
C Characterization (Section 3.5)
Updated ESD specification (Section 3.6)
Added termination requirements for CLKIN if unused (Section 4.1)
Added recommended power-on procedure diagram (Section 4.4)
Changed DLPF_CFG setting 7 to reserved (Section 8.3)
Changed Reflow Specification description (Section 9.12)
Removed errata specifications
03/05/2010
1.3
Updated temperature sensor linearity spec (Section 3.1)
Updated VDD Power-Supply Ramp Rate timing figure (Sections 3.2 and 4.4)
Updated VLOGIC Reference Voltage timing figure (Section 4.4)
Added default values to registers (all of Section 8)
Updated FS_SEL description (Section 8.3)
Updated package outline drawing and dimensions (Section 9.2)
Updated Reliability (Section 10.1 and 10.2)
Removed Environmental Compliance (Section 11)
03/30/2010
1.4
Removed confidentiality mark