User Manual

Note 1:
Water Shortage Alert:
The device beeps 6 times and the “ERR” icon (see above) will appear on the
LED screen display if the water is insufficient. The humidifier will shut off
automatically and will resume once the water is sufficient.
Note 2:
High Temperature Alert:
When the detected surface temperature of PTC is ≥140°C / 284℉ or the
atomized plate is detected to run dry during operation, the humidifier will
automatically enter high temperature alert program. The device displays “HOT”
and beeps once every second for continuous 8 times. The atomizing plate and
PTC stop work, while the fan stops work after continuing 3 minutes. All buttons
are invalid except ON/OFF button (the device will alert again if you press the
ON/OFF button). You can only restart the humidifier after all malfunctions have
been settled.
How to Use the Humidifier
1.Open the head cover (Figure 1).
2.Take the water tank out of the unit (Figure 2),fill the water tank with water and
put it back to the unit; or you can pour water into the water tank,then close the
cover (Figure 3);
Important Notes
- 08 -
Sleep Button
Once the Sleep button is pressed, the humidifier will enter sleep mode and the
LED screen will display 3 times and then will turn off. While in sleep
mode, button tones will be silenced. All functions can be activated in sleep
mode,The heating function will turn off by default (to avoid boiling noise).
Note: If you want to activate this function (in sleep mode), just press the
Heating button again. The humidifier will continue to work as sleep mode after
setup completes.