User Manual

3. Place a new 3V CR2025 battery into the battery compartment with positive
side facing up (figure 2).
4. Replace the battery compartment into the remote.
Note: The remote-controlled distance is 5 m (16 ft.).
Troubleshooting
- 12 -
Problem Possible Cause Solution
The device doesn’t work or
shuts down abnormally.
The device is not plugged. Plug and start the device.
The device stops working
and "001" is displayed on
the LED screen.
Abnormal working temperature of the
PTC heater.
Unplug the device and clean the
water box and PTC heater after the
water temperature gets down.
The device stops working
and "002" is displayed on
the LED screen.
Abno
rmal working temperature of the
atomizing plate.
Unplug the device and clean the
water box and atomizing plate after
the water temperature gets down.
The device has not been plugged in. Plug the cord into an outlet.
The device has not been turned on.
Press the ON/OFF button to start the
device.
There is foreign matter on the atomizing
plate.
Clear away the foreign matter.
There is foreign matter on mist nozzle
. Clear away the foreign matter.
The water level in the water box is too
high.
1.Unplug the device and make sure
the water tank cover is covered in
right place and the water level in the
water box is not too high.
2.Pour out the water and refill the
water tank under the guide of the
user manual.
There is not enough water in the tank. Pour more water to into the tank.
The machine is brand new.
Remove the humidifie
r from the
packaging and let it sit in a well-
ventilated area for 12 hours.
The water in tank is dirty.
Empty the tank and pour in clean
water.
There is no wind and mist or
"003" is displayed on the
LED screen.
The mist has a strange
smell.
There is not enough water in the tank. Pour more water to into the tank.
The device has been placed on an uneven
surface.
Operate the device on a level surface.
The humidifier is making an
odd noise.