User Manual

ON/OFF Button
Once the power cable has been successfully plugged into an outlet, a beep will
sound and the humidifAier will be in standby. The LED screen will display the
current ambient humidity.
Press the ON/OFF button to begin operation. The LED screen will display the
current humidity and the humidifying grade.
Press the ON/OFF button again to cease operation. The humidifier will go into
standby and will display the current ambient humidity.
Note:
1.If the humidifier has been turned off but has not been unplugged, the previ-
ous settings will be restored automatically.
2. After the humidifier has been turned off, the internal fan will run for 3 minutes
to dry the air channel and prevent bacteria generating.
Timer Button
Press the timer button to set your desired humidifying time ranging from 1 to 12
hours. Each button press adjusts the time by 1 hour. (Press and hold the button
for 2s to turn off the timing setting.)
The first time the Timer button is pressed, the LED screen will display
(default mode). In default mode, the device will humidify continuously until the
water runs out.
The second time the button is pressed, the LED screen will display .
The humidifier will automatically turn off after one hour. Each subsequent press
of the button will increase the time by 1 hour.
LED screen displays remaining time in Hour after you complete settings. The
humidifier will automatically stop work and enter standby state after time
completes. The LED screen will display and flash the current ambient humidity.
- 05 -