Thank you for choosing Homeless! Please read this user manual carefully before use and keep it for further reference. Product illustration 1: Mist Outlet 2. Upper Cover 3. Valve Seat ee 4: Power Adapter ea 5. Turning Knob 8. Decorative Board 7. Water Reservoir Bo Atomizing Plate 9.
Features & Simple; stylish; and lightweight & Ultra-quiet operation ® Two optional valve seals ® 100-240V input voltage works in most countries (outlet adapter not included) @ Tank-free design for maximum portability & Water shortage protection # Spill proof ® Large infrasonic humidifying capability for fine.
Power indicator i ¢ * Nonadjustable intermission Originator Plate M Fan Peptide smo Operation Instructions Operating Environment ® Only operate the device on a smooth, level, and sturdy surface. ¢ Place the humidifier away from heat sources like stoves, ovens; direct sunlight, household furniture, and appliances. & Absinthe mist spray away from walls, electrical appliances, and furniture. ® Place the device in a normal temperature condition, otherwise, high'or low temperatures may damage the humidifier.
# For best results, fill the humidifier with purified Walter. & Do oot fill the humidifier with Walter botheration 50 CHM22°F. How to Use the Humidifier Step 1: Take the humidifier out of the color packing box. Step 2: Fill a 500ml bottle: (not included) with water (the recommended maximum water capacity is 800ml). Remove the valve cover and screw if on the bottle, Step 3: Turn the bottle upside down and mount it ion the right place of humidifier.
Step 4: Plug the DC connector into the DC socket of humidifier. Step 5: Plug the:power adaptation a wall power socket, Step 6: Turn the knob clockwise. A blue indicator light will glow when the humidifier has been successfully activated. Clockwise turning the knob increases the humidification mount and vice versa, Water Shortage: Adar indicator light will glow when the humidifier is out'of water.
& Clean the humidifier and bottle thoroughly if they will not be in use for along time. & Clean, wipe, and dry-all components before storage. To Clean the Atomizing Head and Sink 1. i limescale ds present on the atomizing head and sink, soak the affected area with a vinegar and water solution. ‘Make sure the solution stays below the ventral. 2. Let the solution sit for 2-5 minutes. 3. Gently scrub: the surface of the atomizing head and sink with a soft toothbrush or wet cloth. 4.
Safety Precautions # This is not toy! Keep this. device away from children. # [Jo not attempt to dismantle, repair-or modify the humidifier. All repairs must be preformed: by a qualified professional. & Turn off and unplug the humidifier before cleaning, refilling, or moving it. # {i you notice strange odors or sounds, wm off and unplug the device immediately: Consult 3.qualified professional for repairs. # Do not fill the humidifier with additives that are not approved by Homeless.
Troubleshooting Refer to this table if your humidifier is not working properly. Consult our customer service team for further assistance. Problem Possible Cause Solution The indicator does not tum on, There pantomimist. The power adapter hasn't been plugged in properly. Plug in the power adapter again The device has not been turned on. Tun the skibob to power the device The mist smells The water is dirty ar there is limescale buildup.