User Manual
When using the mouse Storing the mouse
FCC ID:
YWO-M-CCP1BB
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this devicemay not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modifiation to this equipment. Such
modifications could void the user's authority to operate the equipment. In order to make improvements to this product, the design and
specifications are subject to change without prior notice.
Wireless Mouse
Manual
ENGLISH
1
Charging
2
Turning the Power On
3
Pairing with a PC
1
2
3
4
10
7
11
Name and function of each part
5
6
9
8
Click on the “Start” button on the lower left
of the screen, and click on the “Settings”
icon.
Click on “Devices” on the “Settings” screen.
Click on “Bluetooth & other devices”, and click
on “Add Bluetooth or other device”.
Click on “Bluetooth”.
Windows
®
10
Click on “CAPCLIP PRO” to
start pairing.
When it changes to “Connected”,
click on “Done”.
This product is added
to “Mouse, keyboard,
& pen”, displays
“Connected “ and
pairing is complete.
From the Apple menu, click “System
Preferences...” to display the system
environment settings screen.
Click “Bluetooth” to display the “Bluetooth”
environment settings screen.
When searching for the device, use a pointed
item to press on the pairing button at the
bottom of the device for 2 to 3 seconds, and
then release.
Select “CAPCLIP PRO”, and click “Connect”
to start pairing.
Pairing is complete when the “Connected”
pops up on the screen, and the status of the
“CAPCLIP PRO” is “Connected”.
Pairing mode is activated, and the LED light blinks green.
Pairing mode is activated, and the LED
light blinks green.
The "Devices" page will appear.
When the “Add a device”
window appears, use a pointed
item to press on the pairing
button of the device for 2 to 3
seconds, and then release.
macOS Catalina (10.15)
6
To use the horizontal scroll function on
Windows
®
, ELECOM Mouse Assistant must be
installed.
To use the "Back" button on your Macintosh, it
is necessary to install the "ELECOM Mouse
Assistant".
Green
Red
Power On Power Off
Attach the cap to the rubber at the back end
of the mouse before use.
Insert the mouse into the cap to store it.
You can clip it to your bag, breast
pocket or PC and carry it around.
Open the connector cover.
Connect the USB [A] connector of the USB charger cable to
the USB port on a PC.
If the PC is not on, turn it on.
Connect the USB [micro-B] connector of the included USB
charger cable to the charging micro USB connector of the product.
The LED light turns on in red, and charging begins.
When charging is finished, this light will turn off.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power
is ON, it automatically shifts to power-saving mode. The mouse is released
from the power-saving mode when it is touched.
* Mouse operation may be unstable for a few seconds after returning from
the power-saving mode.
Slide the power switch to the ON position (the green side).
The LED light is lit green for a fixed time.
* When remaining battery is low, the LED blinks red for a fixed time.
Green
Pairing button
Pairing button
When keyboard setup assistant appears
Depending on the environment, ”Keyboard Setup
Assistant” may appear.
In this case, click the “Close” button on the top left to end
“Keyboard Setup Assistant”. There is no issue here.
Mouse
Cap with clip
Supported OS Windows
®
10, Windows
®
8.1, macOS
Catalina(10.15), iOS13.5/iPadOS13.5,
Android OS 7 to 10
(Updating the OS or installing a service
pack may be necessary.)
* Compatibility information was retrieved
during operation confirmation in our
verification environment. There is no
guarantee of complete compatibility with
all devices, OS versions, and applications.
Resolution 1600 dpi
Compatible standard Bluetooth 5.0 Class2
Profile HOGP (HID Over GATT Profile)
Radio frequency 2.4 GHz band
Radio wave method GFSK
Radio wave range Magnetic surfaces (such as steel desks):
approximately 3 m
Non-magnetic surfaces (such as wooden
desks): approximately 10 m
* These are test values in company
environment and are not guaranteed.
Dimensions
(W × D × H)
When in use:
Approximately 1.7'' × 4'' × 1.38''
When stored:
Approximately 1.7'' × 2.5'' × 1.38''
Weight Approximately 0.14lb
*Including the battery
Operational
temperature/humidity
41°F to 104°F/ up to 90%RH
(without condensation)
Storage temperature/
humidity
14°F to 140°F/ up to 90%RH
(without condensation)
Battery Built-in lithium-ion rechargeable battery
(the battery cannot be removed or replaced)
Operating time Guidelines when used with a fully charged
battery
Continuous operation time: Approx. 14 hours
Continuous standby time: Approx. 26 days
Estimated usage time: Approx. 24 days
(The usage time is estimated given a
mouse operation percentage of 5% of the
8 hours per day spent operating a PC.)
CONTACT US
elecom.net
FOLLOW US
facebook.com/elecomus
Download "ELECOM Mouse Assistant" from the ELECOM website
to use its button assignment and high-speed scrolling functions.
elecomus.com/web/mouse-assistant/
Model: M-CCP1BB
Wireless Mouse
Manual, Safety precautions, and Compliance with regulations
1st edition, November 30, 2020
©2020 ELECOM Co., Ltd. All Rights Reserved.
A customer who purchases outside Japan should contact the local retailer in the country of purchasefor enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available forenquiries about purchases or usage in/from any countries
other than Japan. Also, no foreign language other than Japanese is available. Replacements willbe made under stipulation of
the Elecom warranty, but arenot available from outside of Japan.
· Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
· The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
· When exporting this product, check the export regulations for the country of origin.
·
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
ELECOM CO., LTD. is under license.
· Windows is a trademark of the Microsoft Corporation.
· macOS Catalina, Macintosh and iPad OS are trademarks of Apple Inc., registered in the U.S. and other countries.
· Company names, product names, and other names in this manual are either trademarks or registered trademarks.
4 “Back” button
3 Tilt wheel
Operates the “Back” button on the Web browser.
You can scroll horizontally by tilting the wheel to
the left or right.
5 LED light
7 Micro USB connector for charging
8 Pairing button
9 Power Switch
10 Optical sensor
11 Clip
6 Connector cover
1 Left button
2 Right button
Specifications
During pairing standby state, the LED blinks green.
Turns on in red when charging.
Turns on in green for a fixed period of time when
the power is turned on. When remaining battery
becomes low during use, the LED blinks red.
* Please note that looking directly into the
sensor light may hurt your eyes.
Clip it to your bag, breast pocket, laptop,
etc.
* When clipping the mouse to your laptop,
please be careful not to scratch the
casing or the LCD screen of your laptop.
Be sure to sufficiently check the connector orientation and the
insertion location.
If the LED lamp does not stop blinking even after the prescribed charging time (approximately 3.5 hours), remove the
charging USB cable and stop charging for the moment. Otherwise, this can cause heating, explosions or fires.
MSC-M-CCP1BB-US ver.111
Pairing involves registering Bluetooth
®
devices (in this case, this product and your device) with each other, and authorizing a
connection between them.
This section covers Windows
®
and Macintosh standard Bluetooth
®
functions. Depending on your device or Bluetooth
®
adaptor,
unique Bluetooth
®
functions may be used. Please read the respective manuals for each function.
Please carry out the pairing operation using your current mouse or touchpad on your device.
Safety Precautions
DANGER
WARNING
Please use the included charging cable, and perform
the charging operation as directed by ELECOM.
Using a charging cable other than the one provided, or
not properly following the charging operation directions,
may result in overheating, leakage, or explosion.
Do not tamper with or attempt to take apart the product.
This may result in re or electric shock.
This product does not have a waterproof structure. Use
and store this product in a place where the product
body will not be splashed with water or other liquids.
Rain, water mist, juice, coffee, steam or sweat may also
cause product damage.
In no event will ELECOM Co., Ltd be liable for any lost
prots or special, consequential, indirect, punitive
damages arising out of the use of this product.
ELECOM Co., Ltd will have no liability for any loss of data,
damages, or any other problems that may occur to any
devices connected to this product.
This product is wireless equipment using the entire range of
the 2.4 GHz band and it is possible to avoid the band of
mobile object identication systems. GFSK is used for the
radio wave method. The interference distance is 10 m.
The 2.4 GHz band is also used by medical equipment,
Bluetooth, and wireless LAN equipment conforming to the
IEEE802.11b/11g /11n standard.
Prohibited action
Mandatory action
Situation that needs attention
Limitation of Liability
Cautions for Wireless Equipment
Immediately stop using this product if you notice anything unusual.
Do not use this product if you notice a leaking battery, odd colour
changes, warping, or any other
abnormalities. Continuing to use the product under these
conditions may result in overheating or explosion.
If a liquid substance from this product comes into contact
with any part of your body or clothing, immediately ush
and wash the contacted area with clean water.
Contact between your skin and any liquid inside the internal
battery may result in skin damage.
Only use this product at the specied rated voltage.
Using this product outside of the specied rated voltage
range may result in overheating, electric shock, or injury.
If a foreign object (water, metal chip, etc.) enters the
product, immediately stop using the product, and then
turn the product off. Continuing to use the product under
these conditions may cause a re or electric shock.
If an abnormality is found with this product (such as smoke or an
unexpected smell from the product), immediately stop using it and turn the
power off. When charging, disconnect the included cable from the USB
power supply, such as a USB AC adapter.
After doing this, contact the retailer from whom you purchased the product.
Do not use this product if it is leaking.
If the internal battery is leaking, immediately stop use of the
product. This can pose a risk of overheating and/or damage.
Do not drop or hit this product.
If this product is damaged, immediately stop using the product and
turn the mouse body off.
If you continue to use the product under these conditions, it may
cause a re or electric shock.
Do not put this product in re, as the product may burst,
resulting in a re or injury.
Do not attempt to disassemble, modify or repair this product by
yourself, as this may cause a re, electric shock or product damage.
If you continue to use the product under these conditions, it may
cause a re or electric shock.
Only use this mouse with PCs and video game systems.
Do not look directly at the light from the optical sensor.
Doing so may lead to eye damage.
Do not use this product with any device that may
signicantly be affected if the product were to malfunction.
If this product is used on a transparent surface, such as
glass, or a highly reective surface, such as a mirror, the
optical sensor will not function correctly and mouse
cursor movement will become unstable.
When you no longer need to use this product and the
battery, be sure to dispose of it in accordance with the
local ordinances and laws of your area.
Before using this product, check that there are no other “radio
stations”* operating nearby.
If electromagnetic interference occurs between this product
and other “radio stations”, move this product to another
location or stop using this product.
* Other “radio stations” refer to industrial, scientic and medical
devices using the 2.4 GHz band, as this product does, other
radio stations of this type, licensed radio station premises for
a mobile object identication system that is used in factory
production lines, certain non-licensed low power radio
stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a
serious function or inuence. There are rare cases where
an external radio wave at the same frequency or the radio
wave emitted from a mobile phone causes this product to
malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations
where the use of radio waves is prohibited. The radio
waves of this product may affect electronic and medical
devices (e.g. pacemakers).
The use of a wireless mouse in an aircraft is prohibited by
aviation law because doing so may interfere with ight
safety. Turn off the power of the mouse body before
boarding an aircraft and do not use it in the aircraft.
* ELECOM is not liable for any accident or any indirect or
consequential damage incurred due to the failure of this
product.
CAUTION
Do not place this product in any of the following environments:
In a car exposed to sunlight, a place exposed to direct
sunlight, or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur
In an uneven place or a place exposed to vibration
In a place where a magnetic eld is generated (near a
magnet, etc.)
In a dusty place
In the case that liquid from the internal battery enters your eyes,
do not rub, as this may cause
loss of vision. Immediately ush the contacted area with clean
water and seek treatment from aphysician as soon as possible.