User Manual
Attach the battery cover.
Wireless Mouse
Manual
ENGLISH
Remove the battery cover.
The power indicator light will become illuminated in red for
a fixed period of time.
* Flashes red when the battery level gets low.
Specifications
1
Inserting the battery
2
Turning the power on
3
Pairing with a PC
Slide the power switch to the ON position.
Click on the “Start” button on the lower
left of the screen, and click on the “Settings”
icon.
Click on “Devices”.
Click on “Bluetooth & other devices”.
Insert the battery as instructed on the battery
removal sheet.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is ON,
it automatically shifts to power-saving mode. The mouse is released from the
power-saving mode when it is touched.
* Mouse operation may be unstable for a few seconds after returning from the
power-saving mode.
Ensure that the battery is inserted with its positive
and negative ends oriented correctly.
1
2
3
4
5
6
7
8
9
10
11
12
13
Change to PC1 Change to PC2
When only either “PC1” or “PC2” is paired, and if you turn the
device selection switch to the device that is not paired, the current
connection is disconnected. In this case, reconnect by turning the
device selection switch back to the device that was connected.
For Windows
®
10
The “Windows Settings” window will appear.
The “Devices” page will appear.
If “Bluetooth” is off, turn it on.
Click on “Add Bluetooth or other devices”.
The machine enters into the Pairing mode and the
pairing lamp is lit in red.
Pairing of this product starts.
Click on “Bluetooth”.
Select the connected device using the device
selection switch.
From the Apple menu, click on “System
Preferences...”.
Click on “Bluetooth”.
Click on “Bluetooth”.
For macOS Catalina(10.15)
The System Preferences window will appear.
The “Bluetooth” system setting page will appear.
When the status changes to
“Connected”, click on “Complete”.
The machine enters into the Pairing mode and the pairing
lamp is lit in red.
For the method used in selecting the device to connect,
see “Device selection switch” .
The currently paired Bluetooth device is registered to
the device selected here.
Select the connected device using the device
selection switch.
Press the pairing button for 2 or 3 seconds using
a pointed object and then release.
You can now use the mouse.
You can now use the mouse.
Click “ELECOM BlueLED Mouse” and click
“Pairing”. Registration of this product starts.
Pairing is complete when the pairing light stops
flashing, “Connected” pops up on the screen,
and the status of the “ELECOM BlueLED Mouse”
is “Connected”.
Model: M-XGL10BB/M-XGM10BB/M-XGx10BB
For the method used in selecting the device to
connect, see “Device selection switch” .
The currently paired Bluetooth device is registered
to the device selected here.
Click on “ELECOM BlueLED Mouse”.
When the “Add a device” window appears,
use a pointed item to press on the pairing
button at the bottom of the device for 2 to 3
seconds, and then release.
Pairing is complete when this product is added
to “Mouse, keyboard & pen” and the status is
“Connected”.
Name and function of each part
FCC ID: YWO-M-XG10BB
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this devicemay not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modifiation to this equipment. Such
modifications could void the user's authority to operate the equipment. In order to make improvements to this product, the design and
specifications are subject to change without prior notice.
CONTACT US
elecom.net
FOLLOW US
facebook.com/elecomus
Download "ELECOM Mouse Assistant" from the ELECOM
website to use its button assignment and high-speed
scrolling functions.
elecomus.com/web/mouse-assistant/
Compatible standard Bluetooth
®
3.0 Class2
Profile HID (Human Interface Device)
Resolution 2000 dpi
Radio frequency 2.4 GHz band
Radio wave method FHSS
Operation distance Non-magnetic surface (e.g. wooden desk) approx. 10 m
Magnetic surface (e.g. steel desk) approx. 3 m
* These values were obtained in ELECOM's test environment and are not guaranteed.
Mouse dimensions (W × D × H) M-XGM10BB (M-XGM10BBS) series : approx. 2.9'' x 4.3'' x 1.6''
M-XGL10BB (M-XGL10BBS) series : approx. 3.2'' x 4.7'' x 1.7''
Operating temperature/humidity 41°F to 104°F/90%RH or less (without condensation)
Storage temperature/humidity 14°F to 140°F/90%RH or less (without condensation)
Supported battery AA alkaline battery, AA manganese battery,
AA nickel-me
tal hydride rechargeable battery
Operating time Estimated operating time when using an alkaline battery
Continuous operating time: approx. 222 hours
Continuous standby time: approx. 462 days
Estimated usage time: approx. 402 days
The above is assuming the computer is used for eight hours a day with 5% of that time
spent operating the mouse.
Supported OS Windows
®
10, Windows
®
8.1, Windows
®
RT8.1, Windows
®
7, macOS Catalina 10.15
(Updating the OS or installing a service pack may be necessary.)
* Compatibility information was retrieved during operation confirmation in our verification
environment. There is no guarantee of complete compatibility with all devices, OS
versions, and applications.
Wireless Mouse
Manual, Safety precautions, and Compliance with regulations
1st edition, December 2, 2020
©2020 ELECOM Co., Ltd. All Rights Reserved.
A customer who purchases outside Japan should contact the local retailer in the country of purchasefor enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available forenquiries about purchases or usage in/from any countries
other than Japan. Also, no foreign language other than Japanese is available. Replacements willbe made under stipulation of
the Elecom warranty, but arenot available from outside of Japan.
4 "Back" button
3 Wheel
You can perform the "Back" operation in a
web browser.
5 "Forward" button
You can perform the "Forward" operation in
a web browser.
6 Pairing light/Power indicator light
1 Left button
2 Right button
The light underneath the wheel flashes in red when the mouse
is in a pairing standby state.
When the power is turned ON, the light underneath the wheel
becomes illuminated in red for a fixed period of time. If flashes
red when the battery level gets low.
7 Device selection switch
8 Optical sensor
9 Pairing button
10 Power switch
11 Battery cover
12 Battery storage compartment
13 Battery removal sheet
This product can be used with two Bluetooth devices by
switching between them.
Slide the device selection switch for changing device from
“PC1” to “PC2”.
When the device is connected, the pairing lamp is lit for about
three seconds.
M-XGS10BB/BBS Series
M-XGM10BB/BBS Series
M-XGL10BB/BBS Series
· Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
· The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
· When exporting this product, check the export regulations for the country of origin.
·
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
ELECOM CO., LTD. is under license.
· Windows is a trademark of the Microsoft Corporation.
· macOS Catalina, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
· Company names, product names, and other names in this manual are either trademarks or registered trademarks.
MSC-M-XG10BB-US ver.111
Safety Precautions
WARNING
If a foreign object (water, metal chip, etc.) enters the
product, immediately stop using the product, remove the
receiver unit from the PC, and remove the battery from
the product. If you continue to use the product under
these conditions, it may cause a re or electric shock.
CAUTION
Do not drop the product or otherwise subject it to impacts.
If this product is damaged, immediately stop using it,
remove the receiver unit from the PC, and remove the
battery from the product. After that, contact the retailer
from whom you purchased the product.
Continuing to use the product while it is damaged may
cause a re or electric shock.
This product does not have a waterproof structure. Use
and store this product in a place where the product
body will not be splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or sweat may also
cause product damage.
For this product, use AA alkaline battery, AA manganese
battery, or AA type nickel-metal hydride rechargeable
battery.
Batteries
In no event will ELECOM Co., Ltd be liable for any lost
prots or special, consequential, indirect, punitive
damages arising out of the use of this product.
ELECOM Co., Ltd will have no liability for any loss of data,
damages, or any other problems that may occur to any
devices connected to this product.
This product is wireless equipment using the entire range of
the 2.4 GHz band and it is possible to avoid the band of
mobile object identication systems. FHSS is used for the
radio wave method. The interference distance is 10 m. The
2.4 GHz band is also used by medical equipment, Bluetooth,
and wireless LAN equipment conforming to the IEEE802.11b/
11g /11n standard.
Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
Prohibited action
Mandatory action
Situation that needs attention
Limitation of Liability
Cautions for Wireless Equipment
The receiver unit presents a swallowing hazard for
children, so be sure to store it in a place out of the
reach of children.
If the product is behaving abnormally, such as by
generating heat, smoke, or a strange smell,
immediately stop using the product, shut down the
PC, and then sufciently check whether the product
is generating heat while being careful to avoid being
burned. Then, remove the receiver unit from the PC
and remove the battery from the product. After that,
contact the retailer from whom you purchased the
product. Continuing to use the product under these
conditions may cause a re or electric shock.
Do not attempt to disassemble, modify or repair this
product by yourself, as this may cause a re, electric
shock or product damage.
Do not put this product in re, as the product may burst,
resulting in a serious re or injury.
Do not insert or remove the receiver unit with wet
hands. Also, do not make alternations to or forcefully
bend the receiver unit.
Doing so may cause a re or electric shock.
Do not place this product in any of the following environments:
In a car exposed to sunlight, a place exposed to direct
sunlight, or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur
In an uneven place or a place exposed to vibration
In a place where a magnetic eld is generated (near a magnet, etc.)
In a dusty place
Only use this product with PCs and video game systems.
Avoid looking directly at the light of the optical sensor as
doing so may cause eye damage.
Do not use this product with any device that may
signicantly be affected in the case of this product
malfunctioning.
If this product is used on a transparent surface such as
glass or a highly reective surface such as a mirror, the
optical sensor will not function correctly and the
product's cursor movement will become unstable.
When you no longer need to use this product and the
battery, be sure to dispose of them in accordance with
the local ordinances and laws of your area.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.)
may affect the material quality and color of the product.
When not using this product for long periods of time,
remove the battery. This may cause fluid leak or
malfunction.
Before using this product, check that there are no other “radio
stations”* operating nearby.
If electromagnetic interference occurs between this product
and other “radio stations”, move this product to another
location or stop using this product.
* Other “radio stations” refer to industrial, scientic and medical
devices using the 2.4 GHz band, as this product does, other
radio stations of this type, licensed radio station premises for
a mobile object identication system that is used in factory
production lines, certain non-licensed low power radio
stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a
serious function or inuence. There are rare cases where
an external radio wave at the same frequency or the radio
wave emitted from a mobile phone causes this product to
malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations
where the use of radio waves is prohibited. The radio
waves of this product may affect electronic and medical
devices (e.g. pacemakers).
The use of a wireless mouse in an aircraft is prohibited
by aviation law as its use may interfere with ight
safety. Turn off the power of the mouse body before
boarding an aircraft and do not use it in the aircraft.
* ELECOM is not liable for any accident or any indirect or
consequential damage incurred due to the failure of this
product.
If this mouse isn't going to be used for one month or
longer, remove the receiver unit from the PC.