Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 182 2015-08-03
Amount of arfcn to be set. Up to 3 arfcn supported.
<locked arfcn list>
Arfcn needs to be locked by user.
Scope: (0-124), (128-251), (512-885) or (975-1023).
Parameter Saving
Mode
AUTO_SAVE
Max Response
Time
-
Reference Note
6.2.48 AT+SLEDS Set the Timer Period of Net Light
AT+SLEDS Set the Timer Period of Net Light
Response
+SLEDS: (1-3),(0,40-65535),(0,40-65535)
OK
Test Command
AT+SLEDS=?
Parameters
See Write Command
Response
+SLEDS: <mode>,<timer_on>,<timer_off>
OK
Read Command
AT+SLEDS?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+SLEDS=<m
ode>,<timer_on>
,<timer_off>
Parameters
<mode>
1 Set the timer period of net light while SIM800 series does not
register to the network
2 Set the timer period net light while SIM800 series has already
registered to the network
3 Set the timer period net light while SIM800 series is in the state of
PPP communication
<timer_on>
Timer period of "LED ON" in decimal format which range is 0 or
40-65535(ms)
<timer_off>
Timer period of “LED OFF” in decimal format which range is 0 or
40-65535(ms)