Data Sheet

Smart Machine Smart Decision
Max Response -
Time
Reference Note:
z If user set <mode> from 1 to 0, user should execute at&w command to
save this setting, and then reboot the module by AT command or
pwrkey.
z Part of the project supported this AT command, please refer to chapter
21 for details.
6.2.64 AT+SKPD Keypad Detecting Function
AT+SKPD Keypad Detecting Function
Response
+SKPD: (0-1)
OK
Test Command
AT+SKPD=?
Parameters
See Write Command
Response
+SKPD: <mode>
OK
Read Command
AT+SKPD?
Parameters
See Write Command
Response
OK
ERROR
If key has pressed or released, The URC report is:
+SKPD: <value>,<event>
Write Command
AT+SKPD=<mo
de>
Parameters
<mode>
0 Disable Keypad detecting function
1 Enable Keypad detecting function
<value> The value of pressed or released keypad
<event> The status of keypad
0 Key released
1 Key pressed
Parameter Saving -
Mode
SIM800 Series_AT Command Manual_V1.05 193 2014-07-31