Portable Monitor Quick User Guide
Product Description ⑥ ⑤ ④ ③ ② ① ① Power/Return button; long press button to turn on/off the display, short press button to return ② Dial Wheel: open the OSD menu, control the menu and confirm selection ③ 3.5mm Audio Jack: headphone/speaker expansion interface ④ USB Type-C power Supply Interface: support external power supply and reverse charging, compatible with PD2.
Button Functions The function button is designed with a dial wheel. It comes with a power/return button. 1. Long press power/return button for 3 seconds to turn on/off the display. 2. Press the dial wheel to open the OSD menu, scroll up/down to control the menu and press the dial wheel to confirm selection; short press power/return button to return. 3. When the OSD menu is not open, scroll up the dial wheel to enter display setting menu; scroll up/down to adjust the brightness level. 4.
2. Connect to a mobile phone with TV-out function Type C to Type C external power 5 W 3 A or above The monitor supports the use of USB-C cable to connect to a mobile phone for the display of the mobile phone content, or customized UI interface according to the system setting. When there is no external power supply, the mobile phone battery will be used as a power source to charge the monitor.
3. Connect to Nintendo Switch Type C to Type C external power 5W3A or above The monitor supports the use of standard cable to connect to a Nintendo Switch with Switch TV mode on. The monitor will be charged by external power when it’s connected to 5V power supply; the Switch will run via its own battery with a resolution of 720P.
5. Connect to multiple HDTV devices video/audio signal mini HDTV to HDTV external power 5W3A or above video/audio signal mini HDTV to HDTV external power 5W3A or above Video games device do not support touchscreen function The monitor can work as a TV when it is connected to a HDTV device via the HDTV cable; the monitor can run either via external power or via the power source of a HDMI device through its USB port if the USB port has enough wattage.
FAQ Q: The display and the power indicator cannot light A: Press the power button to check if the monitor is turned on; check if the up. USB cable is properly connected to the monitor and power connector. Q: The display is not on, the power indicator is in red. A: Check if the display and connected device are turned on; make sure the USB cable is properly connected between the display and the connected device; check the signal cable to ensure all pins are properly aligned.
Maintenance And Cleaning Cleaning ● Turn off the monitor and unplug the power cord. Use a non-abrasive cloth to clean the display surface. Wipe the stubborn stains after dampening the cloth in a neutral detergent. ● Do not use detergents that contain alcohol or acetone. Use LCD special cleaner and do not spray the cleaner directly on the screen, as it may seep into monitor and cause an electric shock.
