Data Sheet

Smart Machine Smart Decision
Mode
Max Response -
Time
Reference Note
3GPP TS 27.005 AT+CSCB=0 will reset <mids> and <dcss> and select no <mids> and no
<dcss>.
AT+CSCB=1 means all <dcss> are accepted but this command has no effect
on the list of the <mids> accepted. "0-255" means all <dcss> are accepted.
AT+CSCB=0, <mids> will add the <mids> values in the <mids> current list
handled by module.
AT+CSCB=0, ,<dcss> will add the <dcss> values in the <dcss> current list
handled by module.
If AT+CSCB=0, <mids> is received while the list of <mids> is full, OK is
returned and new value is not added.
4.2.14 AT+CSDH Show SMS Text Mode Parameters
AT+CSDH Show SMS Text Mode Parameters
Response
+CSDH: (list of supported <show>s)
OK
Test Command
AT+CSDH=?
Parameter
See Write Command
Response
+CSDH: <show>
OK
Read Command
AT+CSDH?
Parameter
See Write Command
Response
TA determines whether detailed header information is shown in text mode
result codes.
OK
Write Command
AT+CSDH=[<sh
ow>]
Parameter
<show> 0 Do not show header values defined in commands +CSCA
and +CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>,
<toda> or <tooa> in +CMT, +CMGL, +CMGR result codes for
SMS-DELIVERs and SMS-SUBMITs in text mode
1 Show the values in result codes
Parameter Saving NO_SAVE
Mode
Max Response -
SIM800 Series_AT Command Manual_V1.05 130 2014-07-31