Data Sheet

Smart Machine Smart Decision
>]
Parameter
<command> HEX String --specified in GSM11.14[13.1]
- 'D3' = Menu Selection;
- 'D6' =Event download;
<data> Hex String
If command is ‘D3’ --specified in GSM11.14[8.2]
-Item identifier of main menu
If command is ‘D6’ --specified in GSM11.14[11]
-event list
- '04' = User activity
- '05' = Idle screen available
- '07' = Language selection
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
For more detail used, can refer AT+STKENV command
5.2.3 AT+STKCALL STK call setup
AT+STKCALL STK call setup
Response
OK
Test Command
AT+STKCALL=?
Parameter
See Write Command
Write Command Response
AT+STKCALL=< OK
command> ERROR
Parameter
<command > stk call command
0 (Trigger modem to send STK CALLSETUP)
4 (Trigger modem to send STK CALLSETUP but icon cannot
be displayed)
16 (Proactive session terminated by user)
18 (No response from user)
32 (ME currently unable to process this command)
34 (User reject setup call)
50 (Command data not understood by ME)
Note: Above are the possible terminal response value needed to be
responded by application. It’s modem’s responsibility to response for other
terminal response value
Parameter Saving NO_SAVE
Mode
SIM800 Series_AT Command Manual_V1.05 136 2014-07-31