Data Sheet

Smart Machine Smart Decision
Max Response Time -
Reference Note
According to spec 11.14 , 0x12 (“No response from user”) is not a possible
terminal response value for STK CALLSETUP. So we will translate
0x12(“No response from user”) to 0x20 (“ME currently unable to process
this command”) .
5.2.4 AT+STKSMS STK SMS delivery
AT+STKSMS STK SMS delivery
Response
OK
Test Command
AT+STKSMS=?
Parameter
See Write Command
Write Command Response
AT+STKSMS=<co OK
mmand> ERROR
Parameter
<command > stk sms command
0 (Trigger modem to send STK SMS)
4 (Trigger modem to send STK SMS but icon cannot be
displayed)
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note
Above are the possible terminal response value needed to be responded
by application. It’s modem’s responsibility to response for other terminal
response value
5.2.5 AT+STKSS STK SS setup
AT+STKSS STK SS setup
Response
OK
Test Command
AT+STKSS=?
Parameter
See Write Command
Write Command Response
AT+STKSS=<com OK
mand> ERROR
Parameter
<command > stk ss command
0 (Trigger modem to send STK SS)
4 (Trigger modem to send STK SS but icon cannot be
SIM800 Series_AT Command Manual_V1.05 137 2014-07-31