Data Sheet

Smart Machine Smart Decision
<command > stk DTMF command
0 (Trigger modem to send STK DTMF)
4 (Trigger modem to send STK DTMF but icon cannot be
displayed)
32 (ME currently unable to process command)
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note
Above are the possible terminal response value needed to be responded by
application.It’s modem’s responsibility to response for other terminal
response value.
5.2.8 +STKPCI STK Proactive Command Indication
+STKPCI STK Proactive Command Indication
+STKPCI: < pci_type > [,<proactive_command>,…]
Parameter
<pci_type>
-0 The SAT command is handled by TE.
-1 The SAT command is handled by ME.
-2 No other command (end of session)
<proactive command>
-DISPLAY TEXT,<Command Qualifier>,<text string>
-GET INKEY, <Command Qualifier>,<text string>
-GET INPUT, <Command Qualifier>,<text string>,<Min length>,<Max
length>
-PLAY TONE,<alpha id>,<tone>,< Time unit >,< Time interval>
-SET UP MENU,<the number of item >,<alpha id>
-SELECT ITEM, <the number of item >,<alpha id>
-ITEM,<index>,<id>,<item string>
-SEND SHORT MESSAGE,<alpha id>,<addr>,<sms tpdu>
-SEND SS,<alpha id>,<ss string>
-SEND USSD,<alpha id>,<ussd string>
-SETUP CALL,<alpha id>,<addr>
-SET UP IDLE MODE TEXT,<text string>
-SEND DTMF,<alpha id>,<dtmf string>.
If <alpha id> = 0, the alpha id is null
If <addr> = 0, the addr is null
Parameter Saving NO_SAVE
Mode
Max Response -
Time
SIM800 Series_AT Command Manual_V1.05 139 2014-07-31