Data Sheet

Smart Machine Smart Decision
6.2.10 AT+CMOD Configure Alternating Mode Calls
AT+CMOD Configure Alternating Mode Calls
Response
+CMOD: (0)
OK
Test Command
AT+CMOD=?
Parameter
See Write Command
Response
+CMOD: <mode>
OK
Read Command
AT+CMOD?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CMOD=[<m
ode>]
Parameter
<mode> 0 Only single mode is supported
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
6.2.11 AT+CFGRI Indicate RI When Using URC
AT+CFGRI Indicate RI When Using URC
Response
+CFGRI: (0,1)
OK
Test Command
AT+CFGRI=?
Parameter
See Write Command
Response
+CFGRI: <status>
OK
Read Command
AT+CFGRI?
Parameter
See Write Command
Write Command Response
SIM800 Series_AT Command Manual_V1.05 150 2014-07-31