Data Sheet

Smart Machine Smart Decision
OK
ERROR
AT+CFGRI=<st
atus>
Parameter
<status> 0 Off
1 On
Parameter Saving AT&W_ SAV E
Mode
Max Response -
Time
Reference Note
6.2.12 AT+CLTS Get Local Timestamp
AT+CLTS Get Local Timestamp
Test Command Response
AT+CLTS=? +CLTS: "yy/MM/dd,hh:mm:ss+/-zz"
OK
Read Command Response
AT+CLTS? +CLTS: <mode>
OK
Response
OK
ERROR
Parameter
<mode>
0 Disable
1 Enable
Write Command
AT+CLTS=<mo
de>
Unsolicited Result Code
When "get local timestamp" function is enabled, the following URC may
be reported if network sends the message to the MS to provide the MS
with subscriber specific information.
1. Refresh network name by network:
*PSNWID: "<mcc>", "<mnc>", "<full network name>", <full
network name CI>, "<short network name>",<short network name
CI>
2. Refresh time and time zone by network:
This is UTC time, the time queried by AT+CCLK command is local
time.
SIM800 Series_AT Command Manual_V1.05 151 2014-07-31