Data Sheet

Smart Machine Smart Decision
Response
OK
ERROR
Write Command
AT+CEMNL=<
mode>[,<amount
>,<emergency
Parameter
numbers>]
<mode> 0 disable
1 enable
<amount> Amount of emergency number to be set. Up to 11 emergency
numbers supported
<emergency numbers>
Emergency numbers to be set by user which range is 0-999
Parameter Saving AUTO_SAVE
Mode
Max Response -
Time
Reference Note
6.2.47 AT*CELLLOCK Set the List of ARFCN Which Needs to Be Locked
AT*CELLLOCK Set the List of ARFCN Which Needs to Be Locked
Response
*CELLLOCK: (list of supported <mode>s)[,(list of supported
<amount>s),(list of supported <locked arfcn list>s)[, (list of supported
<locked arfcn list>s) [, (list of supported <locked arfcn list>s)]]]
OK
Test Command
AT*CELLLOC
K=?
Parameter
See Write Command
Response
*CELLLOCK: <mode>[,<amount>,<locked arfcn list>[,<locked arfcn
list>…]]
OK
Read Command
AT*CELLLOC
K?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT*CELLLOC
K=<mode>[,<am
ount>,<locked
Parameter
arfcn
<mode>
list>[,<locked
0 Disable
arfcn list>…]]
1 Enable
<amout>
SIM800 Series_AT Command Manual_V1.05 179 2014-07-31