Data Sheet

Smart Machine Smart Decision
6.2.60 AT+CPCMSYNC Modify note
6.2.62 AT+CANT Modify note
6.2.63 AT+SD2PCM Modify note
6.2.64 AT+SKPD Modify note
6.2.66 AT+CROAMING Modify AT+CROAMING command’s format
Modify AT+CNETSCAN command’s function
6.2.67 AT+CNETSCAN
and note
6.2.68 AT+CMNRP Add AT command
8.2.2 AT+CIPSTART Modify max response time
8.2.30 AT+CIPTKA Add AT command
10.2.4 AT+CIPBEIPING Add AT command
12.2.2 AT+FTPMODE Modify test and write command
12.2.14 AT+FTPGET Modify note, Add “Manual quit” to <error>
12.2.23 AT+FTPLIST Modify note
12.2.24 AT+FTPGETTOFS Add read command
12.2.25
Add AT command
AT+FTPPUTFRMFS
12.2.26 AT+FTPEXTGET Add AT command
12.2.27 AT+FTPFILEPUT Add AT command
12.2.28 AT+FTPQUIT Add AT command
13.2.1 AT+CIPGSMLOC Modify max response time
16.2.1 AT+DDET Modify response value of test command
17.2.1 AT+CREC Modify parameter description and note
18 Modify note
Add URC of
19.3 URC
AT+CGREG,AT+CALA,AT+CIURC,AT+CNMI
20.2 SIM commands Modify response of AT+CPBS=?
21 Modify ATC difference
Add PCM channel in SIM800 and
21.4 AT+CHFA
SIM800-WB64
All Change SIM800-WB64 to SIM800M64
6.2.21 AT+CENG Add format description of part parameters
6.2.40 AT+SGPIO Extend the scope of parameter <GPIO> to “1-7”
6.2.69 AT+CEGPRS Add AT command
12.2.24 AT+FTPGETTOFS Modify description of <loc>
14.2.14 AT+POP3IN Add description of <code> value 69
14.2.22 AT+POP3OUT Add description of <code> value 69
V1.05 2014-07-31
21.2 AT+CMIC Modify
SIM800 Series_AT Command Manual_V1.05 19 2014-07-31