Data Sheet

Smart Machine Smart Decision
Response
+CANT: <mode>, <UrcEnable>, <timer>
OK
+CME ERROR: <err>
Read Command
AT+CANT?
Parameters
See Write Command
Response
OK
+CANT: <status>
Write Command
AT+CANT=<mo
de>,<UrcEnable
>,<timer>
Parameters
<mode> 0 Disable the antenna detecting function
1 Enable the antenna detecting function
<UrcEnable> 0 Disable reporting antenna state by URC
1 Enable reporting antenna state by URC
<timer> 0-3600 Reporting timer in units of seconds, range:
0-3600. Set timer to 0 will close detect, the
recommend value is 10.
<status> 0 Connected normally
1 Connected to GND
2 Connected to other power source
3 Not connected
Parameter Saving AT&W_ SAV E
Mode
Max Response -
Time
Reference Note
Part of the project supported this AT command, please refer to chapter 21
for details.
6.2.62 AT+CAGCSET Close or Open AGC Function
AT+CAGCSET Close or Open AGC Funcion
Response
+CAGCSET: (0,1)
OK
Test Command
AT+CAGCSET=
?
Parameters
See Write Command
SIM800 Series_AT Command Manual_V1.05 191 2014-07-31