Data Sheet

Smart Machine Smart Decision
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CMNRP=<
mode>
Parameters
<mode> 0 Disable dual serial port
1 Enable dual serial port
Parameter Saving AT&W_ SAV E
Mode
Max Response -
Time
Reference Note
z Please refer to SIM800 Series_Serial Port_Application Note.doc.
z Part of the project supported this AT command, please refer to chapter
21 for details.
6.2.69 AT+CEGPRS Switch on or off EDGE
AT+CEGPRS Switch on or off EDGE
Response
+CEGPRS: (0,1) , (2,4,8,9,10,12)
OK
Test Command
AT+CEGPRS=?
Parameters
See Write Command
Response
+CEGPRS: <switch>[,<class>]
OK
Read Command
AT+CEGPRS?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CEGPRS=<
switch>[,<class>]
Parameters
<switch>
0 Switch off EDGE
1 Switch on EDGE
<class> EGPRS multi-slot class
Note: If <switch> value is equal to 1, <class> must be input.otherwise
SIM800 Series_AT Command Manual_V1.05 197 2014-07-31