Data Sheet

Smart Machine Smart Decision
<mean> A numeric parameter which specifies the mean throughput
class
0 QOS mean throughput class subscribed value
1..18 QOS mean throughput class
31
QOS mean throughput class best effort
Parameter Saving AUTO_SAVE
Mode
Max Response -
Time
Reference Note
7.2.5 AT+CGACT PDP Context Activate or Deactivate
AT+CGACT PDP Context Activate or Deactivate
Response
+CGACT: (list of supported <state>s)
OK
Test Command
AT+CGACT=?
Parameters
See Write Command
Response
+CGACT: <cid>,<state>[<CR><LF>+CGACT:<cid>,<state>…]
OK
Read Command
AT+CGACT?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CGACT=<st
ate> [,<cid>]
Parameters
<state> Indicates the state of PDP context activation
0 deactivated
1 activated
Other values are reserved and will result in an ERROR
response to the Write Command.
<cid> A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT Command). If the <cid> is
omitted, it only affects the first cid.
Parameter Saving NO_SAVE
Mode
Max Response 150 seconds
SIM800 Series_AT Command Manual_V1.05 204 2014-07-31