Data Sheet

Smart Machine Smart Decision
<bearer> GPRS bearer
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
This command is allowed to establish a TCP server only when the state is IP
INITIAL or IP STATUS when it is in single state. In multi-IP state, the state
is in IP STATUS only.
8.2.19 AT+CIPCSGP Set CSD or GPRS for Connection Mode
AT+CIPCSGP Set CSD or GPRS for Connection Mode
Response
+CIPCSGP:0-CSD,DIALNUMBER,USER
NAME,PASSWORD,RATE(0-3)
+CIPCSGP: 1-GPRS,APN,USER NAME,PASSWORD
OK
Test Command
AT+CIPCSGP=?
Parameters
See Write Command
Response
+CIPCSGP: <mode>, <apn>, <user name>, <password>[,<rate>]
OK
Read Command
AT+CIPCSGP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPCSGP=<
mode>[,
(<apn>,<user
Parameters
name>,
<mode> A numeric parameter which indicates the wireless connection
<password>),(<d
mode
ial
0 set CSD as wireless connection mode
number>,<user
1 set GPRS as wireless connection mode
name>,<passwor
GPRS parameters:
d>,<rate>)]
<apn> A string parameter which indicates the access point name
<user name> A string parameter which indicates the user name
<password> A string parameter which indicates the password CSD
parameters:
<dial number> A string parameter which indicates the CSD dial numbers
<user name> A string parameter which indicates the CSD user name
<password> A string parameter which indicates the CSD password
SIM800 Series_AT Command Manual_V1.05 228 2014-07-31