Data Sheet

Smart Machine Smart Decision
OK
Parameter
See Write Command
Response
OK
ERROR
Write Command
1) For single IP
connection
(+CIPMUX=0)
<n> 0-5 A numeric parameter which indicates the connection
AT+CIPUDPMOD
number
E=<mode>[,<IP
<mode> 0 UDP Normal Mode
address>,<Port>]
1 UDP Extended Mode
2) For multi IP
2 Set UDP address to be sent
connection
<IP address> A string parameter which indicates remote IP address
(+CIPMUX=1)
<port> Remote port
AT+CIPUDPMOD
E=<n>,<mode>[,<I
P
address>,<Port>]
Parameter Saving NO_SAVE
Mode
-
Max Response Time
Reference Note
8.2.26 AT+CIPRXGET Get Data from Network Manually
AT+CIPRXGET Get Data from Network Manually
Response
If single IP connection (+CIPMUX=0)
+CIPRXGET: (list of supported <mode>s),(list of supported <reqlength>)
OK
If multi IP connection (+CIPMUX=1)
+CIPRXGET: (list of supported <mode>s), (list of supported <id>s), (list
of supported <reqlength>)
OK
Test Command
AT+CIPRXGET
=?
Parameters
See Write Command
Read Command Response
AT+CIPRXGET +CIPRXGET: <mode>
?
OK
SIM800 Series_AT Command Manual_V1.05 234 2014-07-31