Data Sheet

Smart Machine Smart Decision
BREAKEND: <value>
OK
Parameters
<mode> 0 Saved, the value from NVRAM
1 Unsaved, the value from RAM
For other parameters, see the related command.
Response
TA saves HTTP Application Context which consists of following AT
Command parameters, and when system is rebooted, the parameters will
be loaded automatically.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Execution
Command
AT+HTTPSCON
T
Parameters
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
This ATCMD can only be used after run AT+HTTPINIT
11.2.8 AT+HTTPSTATUS Read HTTP Status
AT+HTTPSTATUS Read HTTP Status
Test Command Response
AT+HTTPSTAT OK
US=?
Read Command Response
AT+HTTPSTAT +HTTPSTATUS: <mode>,<status>,<finish>,<remain>
US?
OK
If error is related to ME functionality:
+CME ERROR: <err>
SIM800 Series_AT Command Manual_V1.05 254 2014-07-31