Data Sheet

Smart Machine Smart Decision
12.2 Detailed Descriptions of Commands
12.2.1 AT+FTPPORT Set FTP Control Port
AT+FTPPORT Set FTP Control Port
Test Command Response
AT+FTPPORT= OK
?
Response
+FTPPORT: <value>
OK
Read Command
AT+FTPPORT?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+FTPPORT=
<value>
Parameters
<value> The value of FTP Control port, from 1 to 65535.
Default value is 21
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
Numbers above 65535 are illegal as the port identification fields are 16 bits
long in the TCP header.
12.2.2 AT+FTPMODE Set Active or Passive FTP Mode
AT+FTPMODE Set Active or Passive FTP Mode
Test Command Response
AT+FTPMODE OK
=?
Response
+FTPMODE: <value>
OK
Read Command
AT+FTPMODE?
Parameters
See Write Command
SIM800 Series_AT Command Manual_V1.05 257 2014-07-31