Data Sheet

Smart Machine Smart Decision
+FTPGET:2,<cnflength>
012345678…
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 1 For opening FTP get session
2 For reading FTP download data.
<reqlength> Requested number of data bytes (1-1460)to be read
<cnflength> Confirmed number of data bytes to be read, which may be less
than <length>. 0 indicates that no data can be read.
<error> 61 Net error
62 DNS error
63 Connect error
64 Timeout
65 Server error
66 Operation not allow
70 Replay error
71 User error
72 Password error
73 Type error
74 Rest error
75 Passive error
76 Active error
77 Operate error
78 Upload error
79 Download error
86 Manual quit
Parameter Saving NO_SAVE
Mode
Max Response 60 seconds(In case no response is received from server)
Time
Reference Note
When "+FTPGET:1,1" is shown, then use AT+FTPGET=2,<reqlength> to
read data. If the module still has unread data, "+FTPGET:1,1" will be
shown again in a certain time.
12.2.15 AT+FTPPUT Set Upload File
AT+FTPPUT Set Upload File
Test Command Response
AT+FTPPUT=? OK
SIM800 Series_AT Command Manual_V1.05 266 2014-07-31