Data Sheet

Smart Machine Smart Decision
14.2 Detailed Descriptions of Commands
14.2.1 AT+EMAILCID Set Email Bearer Profile Identifier
AT+EMAILCID Set Email Bearer Profile Identifier
Response
+EMAILCID: (range of supported <cid>s)
OK
Test Command
AT+EMAILCID=?
Parameters
See Write Command
Response
+EMAILCID: <cid>
OK
Read Command
AT+EMAILCID?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
ERROR
Write Command
AT+EMAILCID=<c
id>
Parameters
<cid> bearer profile identifier refer to AT+SAPBR
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note
14.2.2 AT+EMAILTO Set Timeout Value of SMTP/POP3 Server Response
AT+EMAILTO Set Timeout Value of SMTP/POP3 Server Response
Response
+EMAILTO: (range of supported <timeout>s)
OK
Test Command
AT+EMAILTO=?
Parameters
See Write Command
SIM800 Series_AT Command Manual_V1.05 282 2014-07-31